Â
Cheap price: Copper strips are 3.5 times more expensive than aluminum strips , and the proportion of copper is 3.3 times that of aluminum, so aluminum strip for cable are much cheaper than copper strip cable, suitable for low-cost projects or temporary electricity use.
The aluminum strip for cable is very light: the weight of aluminum strips for cable is 40% that of copper strips cable, and the construction and transportation costs are low.
Antioxidant and corrosion-resistant: Aluminum strips for cable reacts quickly with oxygen in the air to form an oxide film, which can prevent further oxidation. Therefore, aluminum strips are a necessary material for high voltage, large cross-section, and large-span overhead transmission, but these advantages of being used for low-voltage lines no longer exist.
Â
Â
Grades |
1050, 1350,1060,1070 |
Temper |
O |
Thickness |
0.1mm-4.0mm |
Width |
10mm-1000mm |
Edge |
Deburred/Angles chamfers /Round |
Weight Tolerance |
-5%--+10% |
Core (ID) |
Ø100mm, Ø150mm, Ø300mm or customized |
Standards |
EN AW-1350 EN AW-1370 EN14121 or as customer's specification |
Â
Â
Our technical expert have long time experience for aluminum strips slitting and edging.we fitted state of art machines for processing, we have a total solution for strips edging system . aluminum strips edge is excellent to meet the requirements of cable.
Â
Â
â—Giner have powerful raw material sourcing channel.
â—7S management of the total QC control.
â—Huge stock can meet the all kinds of customer's requirement.
â—On time delivery.
â—100% Qualified rate.
Â
Â
1.Aluminum ingots into furnace and by heating to remove impurities;
2.The aluminum liquid into rolling machine into thick plates;
3.The thick plate processing by cold rolling mill ;
4.Natural annealing;
5.Slitting and trimming → Edging → Finished product→Packing.
Â
http://www.gintetech.com/